You might also like
Eleanor — Picket-Top Privacy Fence 1.5 m
Estimate your fence costs in few easy steps
Solid panels below with decorative picket tops. Privacy where it matters, open design above.
1.5m height with pointed picket top discourages climbing. Good boundary definition for families.
Solid lower section blocks ground-level noise. Open picket top allows airflow above the fence line.
Same UV-stabilised PVC construction as the full-privacy range. Zero maintenance required.
Combines the charm of a picket fence with the practicality of a privacy panel. Traditional Australian look.
Reinforced posts and bottom rail carry the solid panel weight. Picket top reduces wind resistance.
Overview
The Eleanor pairs a solid tongue-and-groove privacy body with an open picket top where 22 individual pickets pass through the top rail. The result is a fence that delivers genuine privacy across the lower section while adding a distinctive, classic profile along the top — a look that lifts any front yard, boundary, or streetscape.
Aluminium-reinforced rails keep each 238cm-wide panel straight and stable. Pre-routed infills and pickets slot into 127×127mm posts with no specialist tools required. Pair it with matching single or double gates from 1m to 3.6m, or a custom sliding gate for driveways.
Fence Top Style
Medium privacy
Actual Panel Height
150cm
T&G Size
2×29×117cm
U-Channel Size
2.5×2.5×110cm
Top Rail
5×9×241cm
Bottom Rail
5×15×241cm
Bottom Aluminium
Included
Colour
White
Fence Style
Semi Privacy
Actual Panel Width
238cm
T&G No.
8 pc
U-Channel No.
2 pc
Top Pickets
4×4×44cm (22 pc)
Weight
38.56 kg
Assembly Required
Yes
Primary Material
Vinyl
Privacy below, character on top
The Eleanor does something no other panel in the range does — it combines a solid tongue-and-groove body with an open picket top where 22 individual pickets rise through the top rail. Below the pickets, sightlines are blocked completely. Above them, you get a decorative profile that gives the fence a classic, finished look.
PVC won’t rot, rust, warp, or attract termites. There’s no repainting and no restaining — just a clean white finish that stays bright with nothing more than an occasional hose-down.
Everything slots together on site
Pre-routed rails accept both the tongue-and-groove infills and the 22 individual pickets — everything clicks into place without specialist tools, welding, or exposed brackets. Each 238cm panel connects to 127×127mm posts (line, corner, or end) and locks in tight.
Single and double gate kits are available from 1m to 3.6m, plus custom sliding gates for driveways. Every gate matches the Eleanor profile, so your fence line reads as one continuous piece from panel to gate.
Stands up to anything Australia throws at it
Harsh sun, salt air, tropical downpours — the Eleanor handles it all. UV-stabilised vinyl resists fading and discolouration over years of direct exposure, while aluminium-reinforced rails keep each panel straight through strong winds and storm seasons.
The open picket top also allows airflow through the upper section, reducing wind load compared to a fully closed panel — a practical advantage in exposed or coastal locations. Customers across Australia report their panels looking like new after 3+ years with zero maintenance.
Classic street appeal that holds its value
The Eleanor’s open picket top gives any property a distinctive, well-kept look that stands apart from standard flat-top or closed-top fencing. It’s the kind of detail neighbours notice and real estate agents mention — a small design difference that makes a visible impact.
At 150cm, it works beautifully as front-yard fencing — tall enough for genuine privacy, decorative enough to enhance your home’s street presence rather than simply close it off.
Customer Reviews
No reviews yet
Write a Review
No questions yet
