Victoria – Full Privacy Fence 1.8 m
Estimate your fence costs in few easy steps
Full privacy with no gaps. Flat-top panels create an unbroken visual barrier at 1.8m.
Smooth flat-top design with no footholds. 1.8m height meets most council privacy requirements.
Continuous tongue-and-groove panels with no open sections. Maximum noise reduction in the range.
Virgin PVC — no moisture absorption, no warping. Handles humidity, storms, and direct sun.
Clean, modern flat-top profile. Minimal lines suit contemporary homes and landscaping.
Tongue-and-groove interlock distributes wind load across the full panel. Aluminium-reinforced frame.
Overview
The Victoria is the standard-height full privacy fence in the QFS range. At 1.8 metres it sits at the most common boundary fence height for residential properties across Australia. Each panel uses tongue-and-groove PVC boards that slot together edge to edge inside the frame, leaving no gaps and no sightlines through the fence. Aluminium reinforcement in the rails prevents flex and sagging over time, even on long boundary runs where multiple panels sit end to end. Posts are 127×127mm with pre-routed channels, so panels slide into position during installation without specialist tools or exposed fixings. Matching single and double gates are available from 1m to 3.6m, plus custom sliding gates for driveways.
Fence Top Style
Flat Top
Actual Panel Height
180cm
T&G Size
2.2×28×157cm
U-Channel Size
2.5×2.5×150cm
Top Rail
5×15×235cm
Bottom Rail
5×15×235cm
Bottom Aluminium
Included
Colour
White
Fence Style
Full Privacy
Actual Panel Width
235cm
T&G No.
8 pc
U-Channel No.
2 pc
Weight
37.07 kg
Assembly Required
Yes
Primary Material
Vinyl
Solid panels, zero gaps
Tongue-and-groove boards lock together inside the panel frame, creating a sealed surface across the full 1.8m height. Unlike picket or semi-privacy designs, no light passes through the Victoria. The solid construction also reduces noise along the fence line. Neighbours, road traffic, barking dogs on the other side of the boundary, the Victoria puts a physical wall between your yard and the outside.
Built to stay straight
Aluminium inserts run through the rails to keep the panel true under load. PVC expands and contracts with temperature, but the aluminium core holds the frame flat. This matters most on long boundary runs where even small flex compounds across multiple panels. The result is a fence line that stays dead straight years after installation, without the warping and bowing that timber fencing develops over time.
White PVC that stays white
UV-stabilised vinyl resists harsh Australian sun without yellowing or turning brittle. There is no paint to peel, no timber to split, and no metal to rust. Cleaning takes a garden hose and five minutes. The Victoria carries a 30-year warranty, and most panels look the same a decade later as they did on installation day. No restaining, no sanding, no chemical treatments, no annual maintenance costs.
The backyard boundary fence
The Victoria suits standard residential boundaries where the goal is full privacy without decorative extras. Backyards, side fences, pool surrounds, and rear boundaries are its natural territory. For properties that need extra height, the Lady Jane adds 10cm at 1.9m, and the Queen Victoria reaches a full 2 metres. For a more decorative profile along the top, the Mary offers the same 1.8m height with a closed-top picket design that suits Hampton-style homes.
Customer Reviews
Write a Review
No questions yet
Ask a Question
Compare
with similar items
